Stainless Steel sanding preparation and polishing kit. This polishing kit, used with an electric hand drill, is ideal for use on stainless steel with reflective finishes like sinks, cooker hoods, motorcycle and car exhausts etc. It will bring the surface up to a mirror finish.
The kit consists of:
1 x 4" x 2 section sisal Polishing Wheel
1 x 4" x 2 section colour stitch Polishing Wheel
1 x 38mm Cylinder Polishing Mop High Quality 100% Cotton. For Final Polishing Of Interior And Irregular Surfaces. 6mm Diameter Arbor Fits Most Power Drills.
1 x 65mm Dome Polishing Mop High Quality 100% Cotton. For Final Polishing Of Interior And Irregular Surfaces. 6mm Diameter Arbor Fits Most Power Drills.
1 x 50mm Goblet Polishing Mop High Quality 100% Cotton. For Final Polishing Of Interior And Irregular Surfaces. 6mm Diameter Arbor Fits Most Power Drills.
1 x 40 x 40mm Microfibre cloth
6mm x 75mm Tapered Mandrel / Mop Taper.
Vienne Lime - Whiting Powder
Use this to remove grease and compound residues after polishing. Apply it to the microfibre cloth and wipe where you've been polishing. Please note that Vienna Lime is not an actual lime powder but a pure form of super fine calcium carbonate (chalk).
2 x Flap Wheels With 6.35mm Shaft.
1 x Wet/Dry Abrasive Sheets 600 Grade
1 x Wet/Dry Abrasive Sheets 1200 Grade
1 x Wet/Dry Abrasive Sheets 1500 Grade
2 x Single Sided Sponge Sanding Pad Fine
1 x 250g Grey bar =Fastcut
A fast and economical cutter for hard metals. The rate of metal removal is high, with less emphasis on brightness. To be used on sisal buffs for the removal of scratches and "orange peel" from all metals.
1 x 250g White bar = SS Finish
For high brightness and good cut. Suitable for all metals, including stainless steel. Recommended for surfaces that are smooth to begin with and are free of deep scratches. Also suitable to be used after MAXICUT. Use a sisal buff for cutting and a cotton buff for bright finishing.
250ml Liquid Reflection metal polish is applied with a cloth then wipes with a microfibre cloth, contains soft, fine alumina to gently polish and restore metal surfaces such as:
- Stainless Steel
- Aluminium & Aluminium Alloys
Liquid Reflection is ideal for polishing jobs to be done by hand, and imparts an unbeatable shine. Ideal for jobs such as polishing:
- Stainless & brass boat fittings
- Bullbars, rims and alloy fuel tanks
- Household brass and Stainless cutlery
- Restoring scratched and dull kitchen sinks
It is water washable for easy cleanup and can of course be also used with a motorised buffing machine.
2 Reviews Hide Reviews Show Reviews
I ordered the SS repair and polishing kit (SSPK-4002) to polish up a 30 year old SS kitchen sink because due to its size I could not replace it. This kit brought the sink to pretty much as new condition - very shiny. Worked wonders and my wife is delighted with the result. Used 600 grit followed by 1200 grit wet/dry sandpaper to remove fine scratches. Then polishing using the grey bar followed by white bar on the polishing wheels and final wipe using the liquid reflect on microfiber cloth. Highly recommend this product.
I ordered a kitchen sink renovation “kit” to be used with power drill, from you some time back. Just a quick note to let you know I am delighted with the result; it has brought the sink (24 years old) back to as-new condition. My wife is also extremely happy as we were on the verge of buying a new one and any decent sink is in the order of $500-$700. No need to now. There is also enough product to do touch ups, if required, in the future.
I even enjoyed the exercise with the drill as you can see the results as you go!