Perspex Headlight Restoration Kit
Used with a variable speed polisher/sander type machine, this perspex headlight restoration kit has the ability to restore your damaged perspex headlights to new.
The kit consists of:
1 x 75mm hook and loop Backup Pad M14 thread
2 x 75mm Glass Felt Polishing Pads
4 x P800
4 x P1200
4 x P1500
1 x Spray Bottle
1 x 59ml Novus Compound Kit
How to use this kit:
Clean the surface of your headlight, removing all dirt, grease and residue
Tape all exposed areas not to be polished to avoid damage
Depending on the severity of fade in your Perspex, we'd suggest begining with the #2 Novus and a polishing pad. If the fade is deep or there is scratch damage then you may need to use the abrasive pads. Choose an abrasive disc and mount it onto your hook and loop backup pad. If you use the most aggressive then you'll need to work your way through to the 1500grit followed by the Novus#3, then #2 then finish off with the #1
During the process, spray water onto the surface regularly with the spray bottle provided to prevent drying but not to rinse or wash away the slurry created during polishing.
Remember to polish up and down, left and right in even movements on the work area.
Clean the surface thorougly between abrasive pad changes so as not to contaminate the next process.
Keep the surface cool and wet to prevent the surface getting too hot. (Very Important!!)
Inspect the work area by wiping off the residue and keep working until the area is to your satisfaction.
For the final finish, use the Novus #1 applied with a clean microfibre cloth provided.
On completion wash and store your polishing pad to use again on your next project.