For motor cycles, cars, utes, trucks, this superb multi purpose polishing kit for use with an electric hand drill is ideal for use on all metals, soft and hard, alloy wheels, chrome fittings, even golf clubs and other metal surfaces including aluminium, brass, stainless steel, copper and most alloys. Can be used on some plastics and wood.
This kit has an extensive array of applications with the 4" polishing wheels. Will give you a brilliant "mirror" finish.
The kit consists of:
1 x 6" x 2 section sisal Polishing Wheel
1 x 6" x 2 section colour stitch Polishing Wheel
1 x 6" x 2 section white stitch Polishing Wheel
1 x 6" x 2 section B loose flap Polishing Wheel
1 x 6" x 2 section swansdown Polishing Wheel
1 x 38mm Cylinder Polishing Mop High Quality 100% Cotton. For Final Polishing Of Interior And Irregular Surfaces. 6mm Diameter Arbor Fits Most Power Drills.
1 x 65mm Dome Polishing Mop High Quality 100% Cotton. For Final Polishing Of Interior And Irregular Surfaces. 6mm Diameter Arbor Fits Most Power Drills.
1 x 50mm Goblet Polishing Mop High Quality 100% Cotton. For Final Polishing Of Interior And Irregular Surfaces. 6mm Diameter Arbor Fits Most Power Drills.
6mm x 75mm Tapered Mandrel / Mop Taper.
2 x Flap Wheels With 6.35mm Shaft.
1 x Wet/Dry Abrasive Sheets 500 Grade
1 x Wet/Dry Abrasive Sheets 800 Grade
1 x Wet/Dry Abrasive Sheets 1200 Grade
2 x Single Sided Sponge Sanding Pad Fine
1 x 250g Blue bar = Multishine
The multi-purpose finishing compound. Suitable for all metals. Also performs well as a cutter if used on a hard cotton or sisal buff.
1 x 250g Brown bar = Tripoli
Combined cutting and finishing compound for soft metals only. Suitable for aluminium, brass, copper and zinc diecast. Follow up with a finishing compound if a brighter surface is required.
1 x 250g Grey bar =Fastcut
A fast and economical cutter for hard metals. The rate of metal removal is high, with less emphasis on brightness. To be used on sisal buffs for the removal of scratches and "orange peel" from all metals.
1 x 250g Green bar = green Chrome
For mirror finishing with minimal cut. Best used after a perfect cutting or prepolishing operation. Polishes all metals to high brightness when used on a soft cotton buff.
1 x 250g White bar = SS Finish
For high brightness and good cut. Suitable for all metals, including stainless steel. Recommended for surfaces that are smooth to begin with and are free of deep scratches. Also suitable to be used after MAXICUT. Use a sisal buff for cutting and a cotton buff for bright finishing.
1 x 250g Terracotta bar = Bright Cut DX
A fast cutter for all metals with medium brightness. May be used on a sisal buff for cutting, followed on a cotton buff for medium brightness.
250ml Liquid Reflection metal polish is applied with a cloth then wipes with a microfibre cloth, contains soft, fine alumina to gently polish and restore metal surfaces such as:
- Stainless Steel
- Aluminium & Aluminium Alloys
Liquid Reflection is ideal for polishing jobs to be done by hand, and imparts an unbeatable shine. Ideal for jobs such as polishing:
- Stainless & brass boat fittings
- Bullbars, rims and alloy fuel tanks
- Household brass and Stainless cutlery
- Restoring scratched and dull kitchen sinks
It is water washable for easy cleanup and can of course be also used with a motorised buffing machine.
1 x 200gram Blue Sapphire Paste
Blue Sapphire is a metal polish paste, and imparts the same brilliant shine as Liquid Reflection, however it is designed for detailed and intricate surfaces such a motorbike chrome or antiques. After polishing Blue Sapphire dries to a fine powder that is easily brushed or vacuumed off, leaving no residue to adhere to the surface.
Blue sapphire is recommended for Chrome trim over Liquid Reflection as the abrasive is a little finer.
1 x 40 x 40mm Microfibre cloth