Polish Up - Surface Protector
Transparent Polymer Coating
Water, Soil, and Stain Repellant
Protects Glass and Many Other Surfaces
Surface Protector will actually seal the pores of glass, porcelain, ceramic, plastics, polished metals, fiberglass, and marble to make the surface water, soil, and stain resistant. The clear coating guards against the adhesion and build-up of dirt, grime, mold, mildew, rust and mineral deposits. Environmentally friendly and non-toxic, Polish Up's Surface Protector permits the practice of preventive maintenance, reducing costly cleaning, repairs and replacement. Simply spray on and polish off. 1 Fl. oz. (29 ml) of Surface Protector protects approximately 15 sq. ft. (1.4 meters square) of glass.
SURFACE PROTECTOR represents a major breakthrough in surface coating technology, and is unlike any other surface treatment product you have ever used. It actually saves hours and hours of cleaning drudgery, and provides a "preventive cleaning and maintenance shield" to keep surfaces like new! Therefore, for optimum performance, we suggest that you review these TECH TIPS and follow the application instructions carefully…you will benefit immensely!
WHAT IS SURFACE PROTECTOR?
SURFACE PROTECTOR is an ultra-thin polymer coating that is specifically formulated to be applied like a polish to make all glass, porcelain, ceramics, polished metals, laminates, and plastics remarkably water, soil, and stain repellent.
WHAT DOES SURFACE PROTECTOR DO?
It seals, polishes, and protects surfaces with an absolutely invisible "non-stick" finish that allows smudges, fingerprints, dirt, grime, soap scum, rust, hard water deposits, and more…to be wiped or rinsed off easily without the use of harsh soaps, solvents, etergents, or abrasives.
HOW DOES SURFACE PROTECTOR WORK?
The unique SURFACE PROTECTOR polymers chemically bond to the microscopic pores of surfaces and form a non-contiguous, monomolecular coating that is chemically inert, non-flammable, and optically clear.
HOW LONG WILL SURFACE PROTECTOR LAST?
As with all coatings, durability depends upon the quality of the application, the degree of exposure, and the amount of abrasion to which the surface is subjected. Unlike other coatings however, SURFACE PROTECTOR is designed to be renewable, letting its sealing, polishing, and protecting properties actually rejuvenate itself to keep surfaces like new. In general, SURFACE PROTECTOR will last months on sinks, tubs, showers, tile, and glass table tops, and years on windows, mirrors, TV screens, picture frames, and lighting fixtures.
WILL SURFACE PROTECTOR "BUILD UP", CRACK, PEEL, OR DISCOLOR?
Absolutely not! Its novel structure permits it to bond to a surface, but not to itself. Thus, it can never be over-applied, and each re-application merely fills in the voids created by surface abrasion to maintain peak water, soil, and stain repelling performance. Remarkable SURFACE PROTECTOR is unaffected by sunlight, and simply cannot crack, peel or discolor like most other polishes, waxes, and glaze-type coatings.
WILL SURFACE PROTECTOR CHANGE THE GLOSS OF SURFACES?
Amazingly, no! SURFACE PROTECTOR restores luster and the natural gloss of glossy surfaces; it does not add gloss or change the surface of "matte" or "textured" surfaces, and brings out the beauty of whatever was there to begin with. Unlike other materials, it does not leave the surface oily, and does not attract dust and lint!
WHAT ABOUT OLD OR BADLY WORN SURFACES?
It all depends upon how badly worn or scoured the surface is. TPC SURFACE PROTECTOR cannot repair cracks, chips or scratches. Generally, on older, badly worn or damaged surfaces, SURFACE PROTECTOR repellency and longevity is limited, but it will prevent the surface from getting worse. Remember, SURFACE PROTECTOR was developed to keep surfaces like new; to save hours and hours of cleaning drudgery; to prevent deterioration and reduce the need for repairs, maintenance, and replacements.
WHAT HAPPENS WHEN TPC SURFACE PROTECTOR WEARS OFF?
Nothing; it just dissipates, gradually disappearing and leaving the surface the way it was before being protected.
IS IT DIFFICULT TO PREPARE THE SURFACE?
Normally, it's enough to simply wash, rinse and dry the surface before applying SURFACE PROTECTOR for the first time. While many surfaces can be treated in this way without any special preparation, visibly soiled, encrusted or stained surfaces must be thoroughly cleaned before applying SURFACE PROTECTOR. Re-application is even easier, just make sure the surface is dry. SURFACE PROTECTOR, with its built-in polishing and penetrating properties, will do the rest.
WHAT'S THE BEST WAY TO APPLY SURFACE PROTECTOR?
Just apply a small amount of SURFACE PROTECTOR to a soft, padded cloth and carefully wipe it into the surface using a firm, circular and overlapping motion. Badly worn, or surfaces being treated for the first time, should be re-treated to ensure complete and uniform coverage. Then, simply wipe or polish the surface with a clean, soft cloth to remove any excess while "polishing in" luster and protection. Transparent surfaces can be sprinkled with water and wiped with a dry cloth or tissue until clear and sparkling. That's all there's to it; it will work every time. Treated surfaces look cleaner, feel cleaner, and smell cleaner!
HOW DO I KNOW WHEN IT'S TIME TO REAPPLY SURFACE PROTECTOR?
That's easy. When water stops "beading", soil starts "sticking”, or stains start to "show", it's time to reapply. Just before that happens you'll notice that surfaces appear dull and seem to have lost their luster. Open up your bottle of TPC SURFACE PROTECTOR and give the surface a "once-over" to maintain peak performance.
BY THE WAY, WHAT'S THE BEST WAY TO TAKE CARE OF A SURFACE THAT'S PROTECTED BY SURFACE PROTECTOR?
Usually rinsing with plain water will do the trick; at most a light soap-water or mild detergent solution to loosen stubborn dirt or "layered" soil. You'll be amazed at how SURFACE PROTECTOR actually ends scraping and scrubbing, and makes cleaning a snap!
OK, NOW WHERE DO I USE SURFACE PROTECTOR?
On everything that's glass, porcelain or ceramic. It is also great on chrome, stainless steel and plastics - even marble, fiberglass and laminates. Let's look at a short list: Windows, sinks, tubs, showers, tile (walls, floors and counters), bathroom fixtures, lighting fixtures, TV screens, glass tables, glass stove tops, mirrors, pictures, washers, dryers, refrigerators, microwaves, ovens, ranges, laminated countertops and cabinets, china-glassware-pottery - just about any hard surface that you want to keep clean and sparkling!