3 x 75mm Cerium PSA Polishing Discs with a Drill mounted vinyl backing pad
Conventional coated abrasives tend to dull quickly in a glass repair operation. 3M’s unique Trizact™ Structured Abrasive Film provides long lasting, consistent cut and finish while minimizing the abrasive disc change-over and slurry clean-up.
Trizact abrasives are made using a process of microreplication, whereby tiny 3D pyramids of fine grade abrasive mineral are uniformly distributed over the surface of the backing. As the top of these pyramids wears away, fresh cutting mineral is continually exposed to ensure a fast, consistent cut rate that easily removes defects such as scuffs, scratches and acid marks on shop fronts, table glass, windscreens, architectural glass and more to leave an extremely fine finish.
Scratched Glass Repair Process
Polish and leave glass crystal clear using 3M™ Trizact™ Film Disc 568XA Use this cerium oxide disc for a final polish. To begin, wet the surface slightly with a small amount of water. As you polish, the pyramids of mineral on the surface of the disc will break down to form a slurry-like solution. The polishing action that occurs will remove scratches left by previous levelling steps.
Trizact 568XA is a cerium oxide disc, used to develop a rich gloss.
3M Trizact Discs are suitable on all acrylic & polyester solid surfaces including Corian®, Hi-Macs®, Staron®, Infinity®, Formica® Solid Surfacing, Wilsonart® Solid Surface & Freestyle®.
To extend the life of your Trizact Disc wash with water before and after use.